szmtag

Kid Koalas Cardboard-Turntable

 Vimeo Direktschwiegermutter, via Testspiel

Nochmal schicke Plattenpromo: Das neue Kid Koala-Album 12 Bit Blues kommt mit ‘nem Plattenspieler aus Pappe zum Selberbasteln und einer Scheibe mit Sprüchen von Koalas Schwiegermutter, nach dem Klick ein weiterer Clip zum Papp-Turntable.

Gib mir den Rest, Baby…

Magic Mushroom Unicorn Terrarium

Die Star Wars-Terrariums im Etsy-Store (und in der Galerie unten) von The Wonder Room sind wirklich sehr hübsch, so richtig überlegen muss ich allerdings beim obigen Magic Mushroom Unicorn-Terrarium. Und da müssen dann noch fleischfressende Pflanzen rein und am Einhorn müsste man mit ein bisschen Kunstblut rumpinseln… but that’s just me.

Journey deep into the Mushroom forest where you will find the Magical Unicorn. Beware of toadstool rings and willow trees… Stay away from old oaks! …This friendly Unicorn will safely lead the way to the Castle of the Fairy Princess.

Magical Mushroom Unicorn Garden – Fantasy Forest Terrarium Diorama in Glass Dome (via Laughing Squid)

Caines Arcade 2: The Global Cardboard Challenge

 Youtube Direktcaine, via Gizmodo

Vor ein paar Monaten bloggte… das komplette Internet über Caines Arcade, die Flipperbude aus Pappe von Caine Monroy, die er in der Garage seines Pappas gebaut hatte. Seitdem haben sie ihre Viral-Sensation zu einer globalen Papp-Bastel-Bewegung ausgebaut und die Imagination Foundation gegründet. Inspiring stuff…

Raspberry Pi Supercomputer

Letztes Jahr hatte ich über den Mini-Rechner Raspberry Pi gebloggt, einem Single-Platinen-Rechner, mit dem jetzt schon drölf Leute hundert seltsame Sachen machen. Zum Beispiel einen Kindle Terminal Hack oder eben: Ein Supercomputer aus 64 parallelgeschalteten RasPis. Hier ein Tutorial zum Selbermachen (64 RaspberryPis kosten ja tatsächlich grade mal 30 Pfund bzw 37 Euro x 64 = 2368 Euro für nen Supercomputer… ein echtes Schnäppchen!), hier die PM der Uni Southampton.

Das Gehäuse des Raspberry Pi-Supercomputers ist natürlich aus Lego und Hackaday haben ausgerechnet, wieviele RaspberryPis man parallel schalten muss, um auf die Top500-Liste der Supercomputer zu kommen: „If you’re wondering what it would take to get a Raspberry Pi supercomputer into the TOP500 list of supercomputers, a bit of back-of-the-envelope computation given the Raspi’s performance and the fact the 500th fastest computer can crank out about 60 TeraFLOPS/s, we’ll estimate about 1.4 Million Raspis would be needed. At least it’s a start.“

How To make a Rockabilly Batman Leather-Mask

Vor ein paar Tagen hatte ich ein Rockabilly Batman Cosplay gebloggt und jetzt treten zu Halloween die Gotham City Rockers auf, in selbstgemachten Rockabilly Batman-Kostümen. Auf Imgur gibt’s ne kleine Anleitung. (via Boing Boing)

Denki Puzzle: Designer Circuits for Electronics-N00bs

Schickes Elektronik-Bauteil-Puzzle von Yuri Suzuki namens Denki Puzzle, mit dem man DIY-Radios wie Lego zusammensetzen kann. Genau das richtige für Hardware-N00bs wie mich, die als Kind immer Radios auseinandergenommen haben, weil’s ja schon interessiert, was da so drin ist, die aber kein einziges mal wieder zusammenbekamen.

using a kit of [Denki Puzzles'] printed circuit board (PCB) components, each individual part retains a unique shape which visually represents its function and can be built to form working appliances such as a radio or lighting systems. through the process of assembly, an understanding and appreciation of the building blocks of more complex technologies is gained.

yuri suzuki + technology will save us: denki puzzle

Vor nem ‘halben Jahr bloggte Suzukis Androps World Word Lights-Video mit jeder Menge selbstgemachter Robot-Toys und sowas. Guter Mann.

Super Mario Guitar

Schöne Super Mario-Gitarre inklusive Mushroom Inlays von Geekd.com aus Australien. Sweet! (via Obvious Winner)

Bleep Labs do the Jon Spencer Blues Explosion

 Youtube Direktdrums

Tolle neue Spielzeuge aus den Bleep Labs, deren RGB Thingamagoop hier im Regal steht und mit dem ich mir regelmäßig das Hirn in komische Frequenzen dingens. Jedenfalls: Die Bleep Labs gehen seit neuestem mit Labels und Bands ins Bett, das Teil oben ist die Dam Drum-Machine, das Teil ist auf 100 Stück limitiert und kommt mit der 12Inch „I Don’t Wanna Be a Star“ vom Label Stones Throw. Ist natürlich bereits ausverkauft.

Außerdem kommt eine Version der neuen Jon Spencer Blues Explosion-Platte mit einem Teil aus den Bleep Labs: Der Blues Exploder. WANT!

New from JSBX Industries and Bleep Labs: The Exploder! All the fun and rock-power of The Jon Spencer Blues Exploion in the palm of your hands and at your control! Play classic Blues Explosion beats and riffs, or create your own tap-play mode! Mutate sounds with stutter and crush control! Plug in your guitar for a crazy fuzz freakout! And visit outer space with wild theremin action! Blues Explosion! Each Exploder is individually numbered!

(via Make)

My little Cephalopod

Twilight Sparkle und seine little Ponys als Kopffüßer von Deviant-Artist Mimblex. Macht mich sponton drölfmal mehr an, als bunte Pferde, but that’s just me. (via Neatorama)

Inside Adam Savages Toolbox

Mythbuster Adam Savage erklärt seinen Werkzeugkasten, ‘ne Liste seiner Tools gibt’s hier.

The setup you see here started out as two old doctor’s bags. I like the image of the traveling doctor, and I love antiques. But 50-year-old leather was no match for 50 pounds of tools. The bags failed soon after I started working at ILM. I wanted to make an impression at my new job, so I spent an entire weekend remaking the bags out of aluminum. My supervisor suggested scissor lifts to keep them even with me when I was seated. He might have been joking, but I added them.

Es gibt übrigens ‘ne ganze Videoreihe von Tested.com namens „Inside Adam Savages Man Cave“, in der er jede Menge seiner Tools und Projekte erklärt.

How To Catch a Fish with your Hands

Wired erklärt, wie man einen Fisch mit der Hand fängt. Es gibt Bilder von mir, auf denen ich am Flußufer des Rheins einen Fisch in der Hand halte und soweit ich mich erinnere, habe ich den damals tatsächlich mit der Hand gefangen, was selbstverständlich nicht reiner Zufall war, sondern pures Talent und Begabung. (Das mit dem Fisch stimmt, der Rest… naja…)

Remember this simple rule of thumb: if you can see the trout, he can see you, as physics dictates that light flows both ways. So keep a super low profile. Also, you’ll have to approach from downstream. Because they’re fighting a current to stay in one spot, trout spend 95 percent of their time facing upstream. Their side mounted eyes means that they can see behind themselves a bit, but for the most part, they’re going to be focusing on the insects being swept downstream at them.

Once inside 30 feet, any motions in the fish’s field of vision will likely send it scurrying to a deeper part of the river. So get low — crawl if you can — and step quietly.

Auch schön: Wie man den Fisch auf möglichst nette und zuvorkommende Art wieder frei lässt:

The fish will have gone through a bit of trauma and will need help getting oxygen (imagine if a fish just yanked you under water while you were eating a sandwich). So gently rock them forward and backward in the current to get the water moving through the gills. It shouldn’t take too long but after a few massages in the current, that fish should zip out of your hands and back to the river bottom to think things over. He probably won’t hang on that bank again for a while.

Catch a Fish With Your Bare Hands

DIY-Kochen mit Akkuschrauber

 Youtube Direktbohrer, via Make

DIY-Kochen ist zwar quasi ‘ne Tautologie, aber egal: DIYHacksandHowTos erklären in diesem Video, wie man ‘nen Akkuschrauber als Käsereibe, Pfeffermüle und Mixer benutzen und damit spülen kann. Fun!

Giger Counter

HR Giger Counter

Jemand namens Steve D vom Mad Art Lab hat einen Tweet von Bad Astronomer Phil Blait in die Tat umgesetzt: Ein H.R.Giger Zähler. Und das Teil funktioniert natürlich. I love it when stuff like this happens!

 Youtube Direktgiger

Shortly after the movie Prometheus hit theaters, Phil posted this on Twitter: “If I ever go to an alien planet, I’m bringing a Giger counter. #ThingsILearnedFomSciFIMovies” …which, of course, made me think, “I need a Giger counter”. And what’s the first thing you do when you want to build something in the style of H. R. Giger? That’s right, go out for some ribs…

So I headed over to a local science shop I frequent. […] I wandered around for a bit, until the proprietor asked me what I was looking for. I told him I needed a 1/2 scale human skeleton. He paused briefly, walked over to a shelf, picked up an unmarked white box and handed it to me. It’s that kind of place. The rib cage and spine looked like they’d make a good base for my H. R. Giger stuff. (Note: H. R. Gigerstuff was by far the creepiest Sid & Marty Krofft show ever. And that’s saying something.)

I figured it’d be nice if the thing contained a Geiger counter, so I picked up this kit from Adafruit. Yes, it’s an actual Geiger counter. It goes “bip” and everything.

GIGER COUNTER (via Bad Astronomy)

DIY Game of Thrones Risk-Board

Game of Thrones Risk-Board

Fay Helfer hat für einen gewissen Matt Burdette dieses Risk-Spielbrett mit einer Karte des Kontinents Westeros aus Game Of Thrones gebaut. Sowas von WANT! (via Nerd Approved)

Shooting a DIY Satellite into Space for Art

DIY Science als Kunstprojekt, ein selbstgebauter Satellit im Orbit als Installation. Mag ich sehr gerne, die Idee (auch wenn’s bereits genug Weltraumschrott gibt). Die Story kommt zwar von der Daily Mail, aber ich nehm’ denen das ab, hier die Website der Open Source Satellite Initiative. Also: Baikanur Chipmunk approves.

‘Making a satellite is no more difficult than making a cellphone,’ said Song Hojun, 34, who said he built the $500 OpenSat to show people they could achieve their dreams. ‘I believe that not just a satellite, but anything can be made with the help of the Internet and social platforms. I chose a satellite to show that symbolically.’ […]

The bespectacled Song spent nearly six years combing through academic papers, shopping online at sites that specialise in components that can be used for space projects, and rummaging through electronic stores hidden in the back alleys of Seoul. He ran a small electronics business to support himself, but the bulk of his funds came from his parents. The cubical OpenSat weighs 1 kg (2.2 lbs) and measures 10 cubic centimeters. It will transmit information about the working status of its battery, the temperature and rotation speed of the satellite’s solar panel. […]

The components cost only 500,000 won ($440). But the cost for launching it hit 120 million won after Song signed a contract with NovaNano, a French technology company, which acted as a broker to arrange the launch, including submitting paperwork and finding a rocket. The satellite will be launched from the Baikonur Cosmodrome in Kazakhstan in December with another satellite.

Watch out, Nasa! Korean launches $500 satellite built from scavenged parts – and could kick off a DIY space race (via Reddit)